You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
All of a sudden my ipad just started flashing. I have in plugged into my computer, my mac is updated, I've held the buttons down to restart, but it just keeps flashing. It's not showing in finder either. I connected my phone so I know the cord is fine.
iPad Pro, iPadOS 15
Start by connecting your iPad to its Power Adapter and allow the iPad to charge for at least an hour - or preferably overnight. This step is advised as a battery with very low charge, or is failing, may produce symptoms that emulate a boot loop.
If the iPad stabilises, are you able to use the iPad while remaining connected to your Power Adapter? If yes, while monitoring the indicated battery state, disconnect the Power Adapter; if the indicated battery state suddenly falls, or the iPad shuts-off, this test demonstrates the iPad battery having reached the end of its usable life:
iPad Repair & Service - Apple Support
Otherwise, these support pages should help with troubleshooting potential battery and charging issues:
Charge and monitor the iPad battery - Apple Support
If your iPad won't charge – Apple Support
Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W or greater to reliably charge. 5W Power Adapters intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow.
Be aware that many computer USB ports cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).
If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support - and request a remote diagnostic test. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively and perhaps easier, you can initiate and manage your support cases using the excellent Apple Support App. If not already installed on your iPad, the App can be downloaded from the App Store:
https://apps.apple.com/gb/app/apple-support/id1130498044
You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):
Start by connecting your iPad to its Power Adapter and allow the iPad to charge for at least an hour - or preferably overnight. This step is advised as a battery with very low charge, or is failing, may produce symptoms that emulate a boot loop.
If the iPad stabilises, are you able to use the iPad while remaining connected to your Power Adapter? If yes, while monitoring the indicated battery state, disconnect the Power Adapter; if the indicated battery state suddenly falls, or the iPad shuts-off, this test demonstrates the iPad battery having reached the end of its usable life:
iPad Repair & Service - Apple Support
Otherwise, these support pages should help with troubleshooting potential battery and charging issues:
Charge and monitor the iPad battery - Apple Support
If your iPad won't charge – Apple Support
Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W or greater to reliably charge. 5W Power Adapters intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow.
Be aware that many computer USB ports cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).
If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support - and request a remote diagnostic test. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively and perhaps easier, you can initiate and manage your support cases using the excellent Apple Support App. If not already installed on your iPad, the App can be downloaded from the App Store:
https://apps.apple.com/gb/app/apple-support/id1130498044
You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):
Ipad just started flashing Apple logo.
