the reset steps are not working

If your iPad is unresponsive, connect your iPad to its Power Adapter and allow the iPad to charge. Then, while still connected to external power, try a forced-restart:

Force restart iPad (models with Face ID or with Touch ID in the top button)

If your iPad doesn’t have the Home button, do the following:

1. Press and quickly release the volume button nearest to the top button.
2. Press and quickly release the volume button farthest from the top button.
3. Press and hold the top button.
4. When the Apple logo appears, release the top button.

Force restart iPad (models with the Home button)

Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.

If iPad still doesn’t turn on, or if it gets stuck during start up, see the Apple Support article If your iPhone, iPad, or iPod touch won’t turn on or is frozen. Or if your iPad isn’t working correctly after you restart it, see the iPad Support website.

If you continue to experience difficulties, you will need to seek assistance directly from from Apple Support. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively, you can initiate and manage your support cases using the excellent Apple Support App. If not already installed on your iPad, the App can be downloaded from the App Store:

https://apps.apple.com/gb/app/apple-support/id1130498044

You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad:

Genius Bar Reservation and Apple Support Options - Apple

What is it doing that you say it is frozen? Is it just not responding to things, is it not turning on? Make sure your doing the reset correctly, it can be a bit finicky.

Press and release Volume Up, then quickly press and release Volume Down, then quickly press and Hold the Siri/Lock button until you see the Apple Logo. This can take a little bit of time, but continue holding the button down till you see the device turn off (if it is on) and the Apple Logo on the screen. At this point you can release the button and let the iPad continue to boot.

If this doesn’t work, you may want to consider setting up an appointment at an Apple Genius Bar or Apple Authorized Repair Center and have them look at the device and see if there is hardware failure and discuss what your options are with you.